Juki Sewing Machine HZL-DX7

The Juki HZL-DX7 sewing machine guarantees you quick and easy selection of the 10 most used sewing programs and professional results.

Discover the advantages of the Juki DX7

Juki square feed
The Juki industrial box feed system has been transferred to domestic sewing machines.This system allows you to create high quality stitches on all types of fabric.

Floating foot
Another Juki exclusive feature is the 'floating' function which allows you to sew with the foot slightly raised. The lift of the presser foot can be adjusted in 0.1 mm increments up to a maximum of 2.5 mm.

This prevents wrinkling and uneven stitching in the case of a quilting, when sewing materials with fur or knitted fabric.In the case of the crease of the jeans or where a strong difference in height is created, it allows to obtain always regular stitches of the same length.

Straight Stitch Slide Plate
For professional results even on the most difficult materials such as silk, chiffon and the like, just slide the front lever to switch to the hole for the single needle and sew the lightest fabrics with perfect needle penetration: the perfection of transport and stitching of a industrial machine!

The single hole plate will not allow the fabrics to be pushed into the hole of the needle and even in free hand sewing you can obtain precision and perfection. Sew with confidence, only straight stitches can be selected when the single needle function is set.

Professional buttonholes
The sensor system for buttonholes allows optimal feeding on any fabric. One-step buttonholes with the sensor that measures and evenly stitches the left and right sides. And the cutting width is also adjustable.

Programmable foot control
Maximum versatility with the functions that can be assigned to the pedal: with the back (heel) of the special rheostat you can now lift the foot, cut the threads, reinforce the stitch or perform a single stitch by pressing on the heel side of the foot control.

Foot pin function
When sewing is stopped with the needle in the down position the presser foot automatically raises to allow the movement of the fabric.
Sew corners or easily rotate the work, when you resume sewing the foot automatically lowers and continues sewing.

Programmable speed
You can adjust the speed of the start and reverse stitches in three steps: fast, normal and slow.

Start/End seam reinforcement
For the reverse stitching at the beginning and end of the seam, you can choose two types: "reverse stitch" and "lockstitch". If you press the lockstitch button in the middle of a seam, the machine will stop after sewing a cycle of the same.

Precision seams
By pressing and holding the needle up / down button, you can sew slowly. Sew corners, stop and leave with the utmost precision.

Knee lifter
With the knee pad supplied, the foot can be raised and lowered keeping your hands free up to 12 mm.

Automatic needle threader
Threading the needle is something that sometimes wastes a lot of time. With the Juki HZL DX7 just place the thread in the guide, lower the lever and magically you can thread the needle with one hand.

Bobbin winder
To fill the bobbin, just wind the wire a couple of turns and pass it through the guide.You can load the bobbin at any time even while you are sewing as it is done via an independent motor, no work stops, and use the thread cutter after winding.To thread the spool pin, just follow the guide and there is no need to manually pull up or 'fish' the bobbin thread.

Led lighting
The 2-point LED light illuminates the work area homogeneously, avoiding shaded areas.


Main Feature

• 287 stitches options
• 16 type of automatic buttonholes
• 4 fonts
• 7 mm maximum zigzag width
• Manual and automatic thread trimmer
• Automatic needle threader
• Adjustable presser foot pressure
• Drop feed for free-hand stitching
• LED Light
• Special foot control with custom programmable functions

Included Accessories

• Hard case
• Knee lifting lever
• Wide table
• Foot controller
• Bobbin
• Needle Set
• Twin Needle 
• Quilt Guide 
• Auxiliary Spool 
• T-Shape Screwdriver
• Seam Ripper
• Cleaning Brush
• Spool Cap
• Eu power Cord
• Instruction Manual
• Operations Support DVD
• Standard Presser Foot 
• Zipper Presser Foot 
• Overcasting Presser Foot 
• Blind Stitch Presser Foot 
• Buttonhole Presser Foot 
• Manual Buttonhole 
• Open Toe Presser Foot 
• Edge Sewing Presser Foot 
• Smooth Presser Foot 
• Eyelet Punch
• Walking Foot 
• Patchwork Presser Foot 
• Quilt Presser Foot 

Manual instruction (in German and French on request)

See also the Juki HZL-NX7 model with long arm and integrated double transport