Juki Sewing Machine Kirei HZL-NX7

The JUKI NX7 Kirei combines functions and stitch quality of industrial machines with the convenience of a home sewing machine.

Fabric feed

On this model, Juki adopts the box feed system derived from the industry to offer unprecedented fabric feed on a home machine.
The conventional feed of a sewing machine follows an oval movement, while in the Juki Kirei NX7 sewing machine the feed dog performs a rectangular movement and remains in contact with the fabric for longer.
As a result, the fabrics do not deform and do not slip.
Sewing heavy or multi-layered fabrics is no problem with the 7-point of contact steel feed.

Integrated dual feed

The dual feed of the fabric is fully integrated ensures perfect sliding of the upper and lower layers of the fabric and professional seams at any time.
It can be switched on or off with one hand.

Sartorial topstitch

In addition to the straight stitching plate, the feed dog can be changed on this sewing machine.
With just a few simple steps, the Juki NX7 becomes a professional straight stitch machine for unrivaled topstitching.

The ultimate in comfort

The most important buttons are always at hand: thread trimmer, low/high needle, presser foot lift, speed, sewing, reverse sewing and the start button are located directly on the sewing head.

These functions can also be programmed on the large two-part foot control.
The Juki NX7 can be set according to your personal preferences using the touch display.
The sewing machine saves various settings permanently or temporarily.
The automatic thread tension always ensures beautiful stitching. For special cases, you can always set it according to your sewing needs.

The floating mode, the presser foot-knee lifter, the large extension table and the individually adjustable bobbin thread monitor are just some of the advantages of the Juki NX7 that make quilting enjoyable for the quilting enthusiast.

Over 30 cm of free space remains to the right of the needle and 12 cm in height facilitate the insertion and sewing of otherwise unmanageable panels.

The presser foot can be operated in several ways: by hand with the presser foot lever on the back of the machine, with the knee lifter or automatically via the sewing functions and foot control.

Color LCD touch panel

The electronic adjustment of the sewing settings allows intuitive adjustments thanks to the icons.

Electronic keyboard

Choosing a specific motif is easier and even writing a name or phrase to embroider is as simple as on a tablet.

Electronic thread tension

The thread tension that best suits the pattern and stitch length will be set. Sews perfect stitches without shrinkage even on thick or thin fabrics.

On-screen interactive guide

From the touch-screen you can view the instructions for the main functions of the machine without consulting the instruction manual.

Electronic control of the feed dog

Raise and lower the feed dog from the touch control panel. When the foot is raised, the feed dog lowers.
It allows you to switch to free motion or freehand mode without removing the base extension table and removing the fabric without damaging it.

Foot pin function

When you stop sewing, the needle stops at the bottom and the foot automatically raises allowing the rotation of the fabric.
Sew corners easily. When you resume sewing, the presser foot automatically lowers for seams without wrinkles.

Comfortable independent foot control

You can stop the needle at a specific point of your choice. The foot control also allows excellent response for sewing a single stitch.

The foot control can be set on the left or right side of the foot and can be set to perform one of the following 7 operations: reverse stitch, lock stitch, half stitch sewing, one stitch sewing, presser foot raising, thread trimming, no function.

Included accessories with Juki HZL-NX7